News

Home > News > Content
Water Supply Device For Drip Irrigation Equipment
May 19, 2017

By water, water pump, flow and pressure regulator, mixed fertilizer box and fertilizer injector. The water entering the drip irrigation pipeline must have some pressure to ensure the delivery and drip of irrigation water. In order to obtain water with certain pressure, the following methods can be adopted: 1. Use the existing water tower. The relative height difference between the water tower and the irrigation pipe should be calculated. The pressure of the water supply should be 0.1-0.2 MPa, which is equivalent to the relative height difference between the water tower and the irrigation area, which is more than 10 meters. Set pressure tank beside the shaft. The capacity of the pressure tank is 2-8 cubic meters. When the well water is pumped in, it is pressurized to 0.2-0.5 MPa. The pressure tank shall be equipped with automatic water filling device to ensure the uninterrupted and uniform water supply. Simple storage tank. Set the water pot in the greenhouse by simple, such as drums, tanks, cans, plastic cement pool, the general capacity of 0.5 cubic meters. The height of the water storage tank is about 1.5 meters from the ground, and the water is injected into the water tank continuously with the mini water pump. Micro water pump direct water supply.




Copyright © Tianjin Huaxushengtai Technology Co.,Ltd All Rights Reserved.Tel: +86-22-63832001