Home > News > Content
Installation Of Drip Irrigation Belt
May 19, 2017

1, according to the design document requirements, comprehensive check the equipment model, specifications, quantity and quality, prohibited the use of substandard products. The equipment to be installed shall be kept clean, and the plastic pipes shall not be thrown, thrown, pulled or exposed.

2. Install water meters, valves and filters according to design requirements and flow direction markings. The filter and the branch pipe pass through the threaded through connection.

3 、 installation of threaded pipe fittings

Drip irrigation system installation notes

Drip irrigation system installation notes

Need to wrap tape, straight through, lock mother should be tightened.

4, before the bypass installation, first use a special perforator on the branch pipe. When drilling, the perforator can not be tilted, the drill pipe depth shall not exceed 1/2 diameter, then the bypass shall be pressed into the branch pipe.

5. Cut the drip irrigation pipe (belt) according to the length of the plant line. The drip irrigation pipe (belt) is arranged along the plant line, and then the end is connected with the bypass.

6 、 drip irrigation pipe (belt) installed, open the valve, flush the pipe with water, and then close the valve; the drip irrigation pipe (belt) plug in the drip irrigation pipe (belt) at the end; the branch pipe plug at the end of the branch pipe.

7, the whole drip irrigation system installation order is: valve, filter, straight through, branch pipe, drilling, bypass, drip irrigation pipe (belt), flushing pipe, plug.

Copyright © Tianjin Huaxushengtai Technology Co.,Ltd All Rights Reserved.Tel: +86-22-63832001